Call or text anytimeMeridian, TX · Bosque CountyFacebookYouTubeInstagram
Double L Land Management LLC (254) 267-0626Free quote
A ranch road through pasture mulched clear of brush, live oaks left standing on both sides

Forestry mulching in Gatesville, TX

Gatesville cedar and brush, mulched in one pass.

Double L Land Management clears cedar, mesquite and underbrush across Gatesville and Coryell County, TX, with a forestry mulcher that cuts, grinds and spreads it in one pass. There are no burn piles, no hauling, and the topsoil stays where it is.

Fully insured · all-new fleet · Weiler M860A mulchers · CAT 320 excavators

Overgrown cedar, mesquite and thick underbrush are a familiar fight for landowners across Coryell County. Maybe you're reclaiming pasture along the Leon River, preparing a rural build site off Highway 84, or opening up a fence line near Cowhouse Creek that brush has swallowed. Double L Land Management provides forestry mulching in Gatesville that cuts, grinds and processes vegetation in a single pass, leaving your land cleaner, safer and ready for its next use. Call (254) 267-0626 for a free estimate.

What forestry mulching involves

A forestry mulcher is one machine with a high-powered rotary drum and hardened carbide teeth. It cuts woody vegetation, shreds it and spreads it back on the ground as mulch. Traditional clearing needs dozers to push piles, a crew to burn them and trucks to haul off what's left. A mulcher does it in one pass, with far less soil disturbance and no burn piles. It leaves 2 to 4 inches of mulch that holds back weeds, keeps moisture in the soil and breaks down over 12 to 24 months.

Around Gatesville, the usual targets are Ashe juniper (cedar), honey mesquite, prickly pear and dense brush that has taken over grazing land, fence lines and build sites. Our Weiler M860A mulcher and ASV RT-135 skid steer mulcher work through it without disturbing the topsoil underneath. Landowners who've watched cedar eat their pasture for years see the difference on the first walk: open sightlines, passable ground, and land that works the way it was meant to.

Our forestry mulching process

  1. 01

    Property walk and site assessment

    Before a machine touches your land, we walk it with you. We identify what's growing, mark the oaks, pecans and native hardwoods you want kept, and note slopes, rock outcrops and low spots. That shapes the plan, so the run keeps what you want and removes what you don't.

  2. 02

    Equipment staging and boundaries

    We stage equipment at the access point that does the least damage, then confirm exactly where clearing stops: a property line, a fence corridor, a build envelope or a pasture edge.

  3. 03

    Mulching run: cut, grind, spread

    The mulching head takes vegetation at the base, processing stems, branches and root collars together. The operator manages pass width and overlap for an even layer. Ashe juniper, most of Coryell County's overgrowth, doesn't come back from the stump once it's processed, so one thorough pass usually finishes it. Mesquite and cedar elm resprout, so we plan follow-up with you.

  4. 04

    Detail pass and cleanup

    We go back along edges, fence lines and the thickest spots, grade the mulch to an even depth, and clear material away from protected trees and structures. The result looks intentional, not like a machine just ran through.

  5. 05

    Final walk and handoff

    We walk the finished area with you before we pack up. Whether you're running cattle on reclaimed pasture, setting fence posts along a cleared corridor near Oglesby Road, or handing the site to a builder, it's ready for the next step.

Pasture mulched clear of brush with live oaks left standing under a big sky
Drone view of a large tract cleared of brush, oak mottes and a ranch road across the ground

Serving Gatesville and the surrounding area

Our crews serve Gatesville and greater Coryell County, including Copperas Cove, Oglesby, Evant, Flat and rural property along U.S. Highway 84 and State Highway 36. We know the ground here: rolling Grand Prairie plateaus, rocky drainages along Cowhouse Creek, and cedar stands that have been creeping into rangeland for decades. From farms south of Faunt Le Roy Park to acreage near Fort Cavazos, we know what a finished, cleared property needs to look like.

Cedar is a well-documented problem in Coryell County. Ashe juniper uses a lot of water per acre, crowds out native grass, cuts groundwater recharge and takes forage away from livestock and white-tailed deer. Mechanical mulching handles it directly, with no burning or chemicals, in line with the Texas A&M Forest Service's best management practices for mulching and shredding. We do the same work in Lampasas and out in Llano.

Why Gatesville landowners choose Double L

Michael Myers founded Double L in 2021. He's a lifelong land worker based in Meridian, about 44 miles from Gatesville, and he built the business on one rule: treat every landowner's property the way you'd treat your own. That means showing up on time, being straight about what will and won't work on your ground, and doing the job right. We're fully insured with general liability and commercial equipment coverage, and every job is run by an experienced operator, not a subcontracted crew that's never seen your land.

Our lineup (Weiler M860A mulching tractors, CAT 320 excavators, ASV RT-135 and CAT 275XE skid steer mulchers, CAT D5 dozers and an FAE rock mill) covers everything from a targeted fence line to full pasture reclamation, and we match the machine to what your land needs. If your plan goes past mulching, we also do land clearing, rock grinding, fencing and pond construction. Read more about Double L and our crew.

Ready to clear your land? Get a free quote.

If you're ready to take your Gatesville property back from cedar, mesquite and overgrowth, request a free on-site estimate or call (254) 267-0626 to schedule your site walk. We serve Gatesville, Copperas Cove, Oglesby, Evant, Flat and the rest of Coryell County.

44 miles from Meridian

About that by road, on Highway 6, FM 2602 and FM 215. The crew and machines come from our base in Meridian.

Highway 6FM 2602FM 215MeridianGatesville

Questions from Gatesville landowners

How much does forestry mulching cost in Gatesville, TX?

It depends on brush density, terrain, tree size and acreage. Lightly brushed pasture clears faster than old cedar on rocky ground, so the range is wide. Most jobs are quoted by the hour or by the acre after an on-site walk. Call (254) 267-0626 and we'll come out for a free estimate, so you get a real number instead of a guess.

Will brush and cedar grow back after forestry mulching?

Ashe juniper, the most common cedar on Coryell County ranches, does not come back from the stump or root after mulching, so one pass takes care of it. Mesquite is different: it resprouts and may need follow-up treatment or herbicide on the regrowth. We'll tell you up front what's on your land and what to expect after clearing.

Is forestry mulching better than a bulldozer for clearing land?

For most Gatesville-area property, especially with oaks or native hardwoods you want to keep, yes. A dozer pushes everything regardless of value, disturbs the topsoil, builds big debris piles and leaves a rough surface. A mulcher takes only what needs to go, leaves the topsoil, skips the burn pile and leaves a mulch layer that helps the soil.

How many acres can you clear per day?

On moderately brushed Coryell County pasture, a full-size mulcher can usually clear 1 to 4 acres a day. Dense old cedar, heavy mesquite, or steep and rocky ground slow that down. After the site walk, we'll give you a realistic estimate for your property.

Do I need a burn permit or other permits for forestry mulching in Texas?

You don't need a burn permit, because nothing is burned: everything is mulched on site. No hauling permits either, since no material leaves the property. Depending on scope and how the land will be used, some projects may touch local or county grading rules, but most rural residential and farm clearing in Coryell County needs no special permit. We'll flag anything unusual on the site walk.

Can forestry mulching reduce wildfire risk?

Yes, and it's one of the main reasons Coryell County landowners mulch near buildings, fence lines and wooded acreage. Dense cedar acts as ladder fuel, letting fire climb from the ground into the canopy. A 100 to 200 foot buffer cleared with a mulcher removes that fuel, breaks up continuous brush and makes it much harder for fire to move across your property.

Let’s get your land working for you.

Free on-site estimates for farms, ranches and homesites in Gatesville, TX.

CallFree quote