Call or text anytimeMeridian, TX · Bosque CountyFacebookYouTubeInstagram
Double L Land Management LLC (254) 267-0626Free quote

Metal buildings in Meridian, TX

From a cleared pad to a finished barn, with one crew.

We build barns, workshops, equipment storage, multi-use metal buildings and barndominiums (turn-key or shell-only) designed around your land. We clear and prep the site, pour the slab and put up the building ourselves.

Fully insured · all-new fleet · Weiler M860A mulchers · CAT 320 excavators

Drone view of an open-sided metal pavilion covering equipment on a gravel pad

Equipment left out in Central Texas weather wears out fast, tools and livestock need cover from summer heat and hail, and most working properties never have enough covered space. Double L builds metal buildings in Meridian, TX and across Bosque County, TX for equipment storage, workshops, livestock barns and multi-use structures. We handle the project from the site walk to the final walk, so you deal with one crew and one schedule.

What a metal building from Double L involves

A good metal building starts with a properly prepared site. Steel framing doesn't swell, warp or rot the way wood can, but the foundation still decides everything that follows. Shallow limestone sits under much of Bosque County, so the grading and sub-base work have to be right before the slab goes in.

From there, anchor bolts are set, the frames go up, and wall and roof panels go on in sequence. You get a clear-span interior with no posts in the way. Roll-up doors, walk doors, insulation, windows, lean-tos, overhangs and interior framing are designed in from the start, not tacked on later. Landowners who've been stacking equipment under tarps tend to describe the finished building the same way: roomy, solid and useful the same day.

Buildings we build

  • Equipment storage buildings. Keep tractors, implements and vehicles out of the weather.
  • Workshops. Room for repairs, woodworking, fabrication or a home-based business.
  • Barns and agricultural buildings. Strong, versatile buildings for livestock, feed and supplies.
  • Carports and storage buildings. Secure, weatherproof cover for vehicles, tools and outdoor gear.
  • Multi-use buildings. Workspace, storage and livestock areas under one roof.
  • Barndominiums. Turn-key barndo builds, or a shell-only package you finish yourself. More below.
Metal building from above: a white three-bay building on a new gravel pad beside pasture
A metal barn with open drive-through bays on a new concrete slab

Turn-key barndo builds, or shell only

Want a barndominium? We do turn-key barndo builds: we clear the site, prep the pad, pour the slab and put up the building, and we take the build through to a finished barndo, so you deal with one crew from raw land to the end.

We also offer shell-only packages, if you'd rather finish the inside yourself or with your own builder. Tell us which way you want to go at the site walk, and we'll quote it that way.

How big should your building be?

It depends on what you're putting in it. A few common starting points:

  • Tractor and implements. Often a 40 by 60 foot building with 14 or 16 foot eaves.
  • Cattle operations. Working pens, hay storage and a small treatment area often need 60 by 80 feet or more.
  • Workshops. A vehicle bay and bench space usually run 30 by 50 to 40 by 60 feet.

We work out the size with you on site. We'd rather size it right once than have you outgrow it in two years.

Our metal building process

  1. 01

    Site walk and design

    We walk the property with you to settle pad placement, drainage, utility access and orientation, then dimensions, doors, roof pitch and how you'll use the building.

  2. 02

    Site prep and concrete

    The pad is graded, compacted and formed. We do the concrete work ourselves, so slab thickness, rebar and anchor bolts all match the building.

  3. 03

    Frame erection

    Base rails are set and leveled, then the main frames, purlins, girts and bracing go up.

  4. 04

    Sheeting, doors and final walk

    Roof and wall panels, doors, windows, trim and any lean-tos go on. We walk the finished building with you, and it's ready to use.

Most projects take four to eight weeks from the site walk to a usable building, depending on permits, concrete cure time and how complex the design is.

Why build with Double L

Because we're a full-service land company, we can clear the build site, grind out rock on the pad, pour the concrete and put up the building as one project. Nobody hands the job off between contractors, and nobody points fingers.

Double L is family-owned, based in Meridian, TX and started by Michael Myers in 2021. We're fully insured, our estimates have no hidden charges, and the people on your job are our own crew, not a subcontracted one that's never seen your property.

Metal building service area

We build in Meridian and all over Bosque County, and across Central Texas in Waco, Stephenville, Cleburne and Hillsboro. See our local pages for metal buildings in Bosque County, metal buildings in Hill County and metal buildings in McLennan County.

Start your building

Once it's up, finish the property with new fencing or a custom ranch gate. Request a free metal building estimate or call (254) 267-0626 to set up a site walk.

Clear it. Shape it. Build on it.

Where this fits on your property.

Usually comes after Land Clearing and Rock Grinding. Often followed by Custom Gates, Decks & Gazebos and Fencing.

  1. Clear it

  2. Shape it

  3. Build on it

Metal buildings questions

How much does a metal building cost?

It depends on the size, features and layout. We give you a clear, upfront estimate after we've walked the site and talked through the project.

What options can I add to a metal building?

Roll-up doors, walk doors, a concrete slab, insulation, windows, lean-tos, overhangs, interior framing and different roof and wall options. We plan them in at the site walk, so there are no surprise add-ons after you've said yes.

How long does a metal building take?

Most projects take four to eight weeks from the site walk to a building you can use. The slab needs about a week to cure before framing starts, and permits or a more complex design add time.

Can you clear and prep the site too?

Yes. We can clear a brushy or wooded site with our Weiler M860A mulcher, grade the pad with our CAT D5 dozer, pour the concrete and put up the building without handing the job to anyone else.

Do I need a permit for a metal building?

It depends on where you are and what the building is for. In unincorporated areas, genuine farm and ranch buildings may be exempt from commercial permitting. Buildings for business use, living space, or with electrical or plumbing usually need one, and inside Meridian or Clifton city limits you almost certainly will. Check with the county or city, and we'll help you work out what applies.

Do metal buildings hold up to Central Texas hail and wind?

Yes, when they're engineered for it. Steel framing doesn't rot, warp or draw termites, and buildings designed for Central Texas weather handle the hail, wind and temperature swings here. The key is engineering that matches local conditions, not a generic spec drawn up somewhere else.

Let’s get your land working for you.

Free on-site estimates for farms, ranches and homesites across Texas.

CallFree quote