Call or text anytimeMeridian, TX · Bosque CountyFacebookYouTubeInstagram
Double L Land Management LLC (254) 267-0626Free quote
Metal building from above: a white three-bay building on a new gravel pad beside pasture

Metal buildings in Bosque County, TX

Barns, shops and carports built in our home county.

Double L Land Management builds custom metal buildings across Bosque County, TX: equipment sheds, livestock barns, carports and workshops. We're based in Meridian, and we can clear the site, pour the slab and put up the steel as one project.

Fully insured · own operators · site, slab and steel from one crew

If you own land in Bosque County, whether it's a working ranch along the Bosque River, a rural tract off Highway 144 near Valley Mills, or a homesite outside Clifton, you probably need more covered space than you have. Equipment left outside in Central Texas weather wears out fast. Tools and livestock both need protection from the summer heat and the hailstorms that roll through the Grand Prairie. Double L Land Management builds custom metal buildings throughout the county. We're based right here in Meridian and have been working this land since 2021. Call (254) 267-0626 for a free on-site estimate.

What a metal building from Double L involves

A metal building starts with a properly prepared site and ends with a structure built to take decades of Central Texas weather without becoming a maintenance chore. Wood framing swells, warps and rots with ground moisture and repeated rain-dry cycles. A steel frame doesn't. On Bosque County ground, where shallow limestone sits under much of the county, proper grading and sub-base prep are critical before the slab goes in. From there, anchor bolts are set, frames go up, purlins and girts are installed, and wall and roof panels go on in sequence. The result is a clear-span interior with no columns, so you can use the full footprint.

  • Equipment sheds and carports. Get the tractor, the baler and the truck out from under the tarps.
  • Livestock barns. Room for cattle instead of an undersized shelter.
  • Workshops. A vehicle bay and bench space, or a full welding shop.
  • Multi-use buildings. Storage, shop and shelter under one roof.

Roll-up doors, walk doors, windows, insulation, lean-tos and interior framing are designed in from the start, not tacked on later.

Our metal building process

  1. 01

    Site walk and building design

    Before a shovel touches the ground, we walk the property with you to confirm pad placement, drainage, utility access and orientation. We talk through size, doors, roof pitch and what the building is for, whether that's parking a baler and a tractor, housing cattle or setting up a welding shop. Getting this right up front avoids changes mid-build.

  2. 02

    Site prep and concrete

    The pad is graded, compacted and formed before any steel is delivered. Shallow limestone and shifting clay near creek drainages need careful sub-base work. We pour the concrete ourselves, so slab thickness, rebar and anchor bolt placement match the building from day one.

  3. 03

    Anchor bolts and base rails

    Once the concrete cures, anchor bolts are checked against the engineered drawings and base rails are set and leveled. A level, correctly anchored base rail is what makes the walls and roof come together right.

  4. 04

    Frame erection

    Primary steel frames are set and bolted, then purlins and girts form the secondary grid. Diagonal bracing rods go into the roof and walls. This is where the building takes shape.

  5. 05

    Sheeting, doors, trim and final walk

    Roof and wall panels go on lapped so water sheds away from the building. Roll-up doors, walk doors, windows and any lean-tos are installed and sealed. We walk the finished building with you before we pack up: every door works, every panel is tight, and you can pull a tractor in that afternoon.

A metal shop building at the end of a new caliche drive lined with live oaks
Drone view of a large tract cleared of brush, oak mottes and a ranch road across the ground

Serving Bosque County from our base in Meridian

Meridian is the Bosque County seat, so we're closer to most county jobs than a contractor driving in from Waco or Fort Worth. Our crews build throughout the county: ranches and homesteads north of Meridian along Highway 174, Valley Mills and Clifton to the east, south toward Walnut Springs and Iredell, and rural property along the Brazos River near Kopperl.

Bosque County sits in the Grand Prairie, and the limestone under much of it is a real factor in foundation work. It pays to hire a contractor who has poured slabs on this ground, not one guessing from a distance. If your project needs a formal permitting path, we'll walk you through it. We also build in McLennan County and Hill County.

Why Bosque County landowners choose Double L

Michael Myers started Double L in Bosque County in 2021. He knew rural landowners here needed contractors who show up on time, communicate clearly and do the work right without inflating the invoice. We're fully insured (general liability and commercial equipment coverage), and every project is run by our own crew, not handed off to a subcontractor who's never seen your property.

The bigger difference is that it's one job. We can clear the build site with land clearing or forestry mulching, grade the pad, pour the concrete and put up the building on one schedule with one point of contact. We also build fencing that fits into the same project if you're laying out a new working area. Read about Michael and the crew.

Ready to build? Get a free quote.

If you're ready to add covered storage, a working barn or a shop to your Bosque County property, request a free on-site estimate or call (254) 267-0626. We serve Meridian, Clifton, Valley Mills, Walnut Springs, Iredell, Kopperl and the rest of Bosque County. We also offer pond construction for landowners building out a complete property plan.

Home ground

Meridian is the Bosque County seat and our base, so the towns around it are a short drive from where the machines are kept.

MeridianWalnut SpringsKopperlIredellMorganCranfills GapCliftonValley Mills

Questions from Bosque County landowners

Do I need a building permit for a metal building in Bosque County, TX?

It depends on where the property is and what the building is for. In unincorporated Bosque County, agricultural structures used for real farm or ranch purposes may qualify for an exemption. Buildings for business use, residential occupancy, or with electrical or plumbing usually need a permit, and inside Clifton or Meridian city limits you will almost certainly need one. Check with the county or your city's building department before you start, and we'll help you work out what your project likely needs.

What foundation do you pour for metal buildings in Bosque County?

Most are poured on a conventional monolithic slab, with thickness and rebar set by the building's span, weight and use. Where limestone sits close to the surface, we may do extra sub-base work to get an even bearing surface. For livestock or heavy equipment, we usually recommend a thicker slab and extra reinforcement at door thresholds and high-traffic areas.

How long does a metal building project take in Bosque County?

Most residential and agricultural buildings take four to eight weeks from site walk to a usable building, depending on permits, concrete cure time and how complex the design is. Larger buildings with multiple bay doors, interior framing or heavy site prep take longer. You get a realistic timeline at the quote stage, not a sales pitch.

What size metal building do I need for equipment or livestock?

A tractor and a few implements usually fit in a 40×60 with 14- or 16-foot eaves. Cattle operations with working pens, hay storage and a small treatment area often need 60×80 or larger. Workshops with a vehicle bay and bench space typically run 30×50 to 40×60. We'd rather size it right once, on site, than have you outgrow it in two years.

Can Double L clear and prep the site before the building goes up?

Yes, and it's one of the main reasons Bosque County landowners call us. We can clear a treed or brushy build site with our Weiler M860A mulching tractor, grade the pad with our CAT D5 dozer, pour the concrete and erect the building without handing the job to anyone else. Ask for a site-to-structure estimate.

Do metal buildings hold up to Central Texas hail and wind?

Yes. Steel framing doesn't rot, warp or draw termites, and metal panels are rated for specific wind loads. A building engineered for Central Texas is designed for the hail, wind and temperature swings that come with life in Bosque County. The key is engineering that matches local conditions, not a generic spec drawn up somewhere else.

Let’s get your land working for you.

Free on-site estimates for farms, ranches and homesites in Bosque County, TX.

CallFree quote