Call or text anytimeMeridian, TX · Bosque CountyFacebookYouTubeInstagram
Double L Land Management LLC (254) 267-0626Free quote
Underbrush mulched out beneath live oaks, leaving open ground and shade

Land clearing and forestry mulching in Kerrville, TX

Cedar off the Guadalupe hills around Kerrville.

Double L Land Management clears cedar, mesquite and brush on homesites, ranchettes and ranch land around Kerrville, TX, from the hills above the Guadalupe River out toward Ingram and Center Point. On the hillsides we mulch in place, so the chips stay on the slope and the thin soil stays put.

Fully insured · all-new fleet · Weiler M860A mulchers · CAT 320 excavators

Kerrville sits on the Guadalupe River, and the land climbs out of the river valley into limestone hills, with ledges and steep draws on most slopes. Away from the river, much of that ground has gone to Ashe juniper and mesquite, thick enough on some hillsides that you can't see the next ridge. Double L Land Management provides land clearing and forestry mulching in Kerrville and across Kerr County, and we bring the crew and machines down from our base in Meridian.

What's on Kerr County land

  • The soil. Dark loam over limestone in the northwest of the county, lighter brown and red dirt over clay to the south and east, and not much of it deep enough to plow. Thin soil is the reason we mulch instead of scraping wherever we can.
  • The brush. Ashe juniper, mesquite and shin oak, mixed through the live oak that's usually worth keeping.
  • The land use. Livestock, hunting leases and a growing number of homesites and ranchettes split from older ranches.
  • The roads. Interstate 10, US 83 and 87, and Highways 16, 27 and 39 reach most of the county, which makes it practical to bring heavy machines in.

How we work Kerrville hill ground

  1. 01

    Read the slope first

    On the walk we look at how steep the ground is, where limestone ledges break the surface and which way water runs off toward the Guadalupe or its creeks. That decides where the machine can go and what stays as a buffer.

  2. 02

    Mark what stays

    We flag live oaks, views and any brush you want kept for privacy or cover. Close to oaks, we plan around the February to June oak wilt season, when the Texas A&M Forest Service says oaks shouldn't be wounded.

  3. 03

    Mulch and leave the cover

    On a hillside, the mulcher cuts cedar at the ground and leaves the chips in place, which keeps thin soil from washing off the slope after a hard rain.

  4. 04

    Shape what needs shaping

    Where you need a pad, a drive or a level spot for a barn, the CAT D5 dozer and rock grinding turn ledge rock and slope into ground you can build on.

Drone view of a hillside mulched clear of brush, oak mottes left across the slope
Forestry mulching from above: a Double L wheeled mulcher cutting cedar between live oaks, dust in the air

Homesites, ranchettes and leases

Around Kerrville the work tends to split three ways. Homesite buyers want a build site and a drive opened through the cedar, with the oaks left around the house. Owners of acreage off Highway 16, Highway 27 or Highway 173 want the understory cleared so they can use and see the whole property, plus a cleared buffer around the buildings. On hunting land, where leases are part of what the land earns, we clear lanes, feeder roads and openings to fit how it's hunted. Near the water there's one more step: much of the low ground along the Guadalupe and its creeks is mapped floodplain, and the Kerr County Engineer's office requires a floodplain determination or permit for any work in it, so a pad or drive close to the river starts with a call to the county.

Clearing is often the first step of a bigger plan. A cleared fence line is ready for new fencing, a cleared draw can become a stock or wildlife pond, and a cleared pad can take a metal barn or shop.

Kerr County and the hills around it

Every Kerr County project starts with a free on-site estimate and a scope agreed before we load. The county borders Gillespie County to the north, where we clear land around Fredericksburg, and we also work in Kendall County to the east and Bandera County to the south.

If you want to see what managed cedar country looks like before you decide how much to take out, Texas Parks and Wildlife runs the Kerr Wildlife Management Area west of Hunt, about 6,500 acres at the headwaters of the North Fork of the Guadalupe. Brush control, prescribed burning and grazing are all part of how it's managed, and the department hosts seminars and tours there. On your own place, expect 1 to 4 acres a day on moderate brush; old cedar on a steep Kerr County hillside runs slower.

If your Kerrville property is ready for work, request a free on-site estimate or call (254) 267-0626 to set up a walk.

200 miles from Meridian

About that by road, on Highway 6, US 281, US 290 and SH 16. The crew and machines come from our base in Meridian.

Highway 6US 281US 290SH 16MeridianKerrville

Questions from Kerrville landowners

Does Kerrville's tree ordinance affect clearing my lot?

It can if the lot is inside city limits. The City of Kerrville adopted a tree preservation ordinance in January 2025, violations can carry a fine of up to $2,000, and a developer can't get a plat approved without a tree plan. Ask the city what applies to your property before work starts, and we'll plan the clearing around the trees it says to keep.

Can you clear a steep hillside lot around Kerrville?

Usually, yes. Tracked machines work slopes that wheeled equipment can't, and mulching leaves cover on the ground so thin soil doesn't wash. Very steep or ledgy ground slows the pace, and some spots are better left alone. We'll say which on the walk.

Will clearing near my live oaks spread oak wilt?

Oak wilt spreads through fresh wounds and connected roots. The Texas A&M Forest Service advises against wounding oaks from February through June and recommends painting any wound right away. Close work around oaks is best planned for summer or winter, with the machine kept off trunks and roots.

Can you clear shooting lanes and feeder roads on a Kerr County lease?

Yes. We lay out lanes, roads and openings with you on the walk so they fit the stands and the terrain. If you lease the land, the owner needs to approve the work before we start.

Let’s get your land working for you.

Free on-site estimates for farms, ranches and homesites in Kerrville, TX.

CallFree quote